2004 MERCEDES BENZ CL CLASS
Problem: SUSPENSION
On certain vehicles, corrosion may occur in the inner steel portions of the active body controls (abc) high pressure distribution hose due to extensive exposure to humidity causing deterioration of the hose.
- This may result in abc hydraulic fluid leakage near the catalytic converter. Leaking fluid may come in contact with hot engine components and lead to a possible fire.
Dealers will install new corrosion resistant abc high pressure distribution hose. The recall began on july 2, 2007. Owners may contact mercedes-benz at 1-800-367-6372.
2004 MERCEDES BENZ CL CLASS
Problem: LATCHES/LOCKS/LINKAGES:TRUNK LID:LOCK
On certain vehicles, the trunk lid springs could fail in the closed trunk lid position.
- If the trunk lid is manually lifted, it may not remain in the up position and could cause injury if it comes down while someone is reaching into the trunk.
Dealers will replace both trunk lid springs. The recall began august 17, 2004. Owners should contact mercedes- benz at 1-800-367-6372.
2004 MERCEDES BENZ CL CLASS
Problem: INTERIOR LIGHTING
On certain vehicles, the instrument cluster is experiencing electrical malfunctions. The instrument cluster contains gauges and indicators that must be illuminated whenever the vehicle is in operation.
- Due to inadequate illumination, the driver will be unable to read the gauges and indicators, such as the speedometer, which could increase the risk of a crash.
Dealers will replace the instrument cluster modules. The recall will be conducted in phases. Phase i was mailed out to approximately 7,500 owners on september 29, 2006. Phase ii and phase iii is scheduled for december 2006. Owners may contact mercedes-benz at 1-800-367-6372.
2004 MERCEDES BENZ CL CLASS
Problem: ENGINE AND ENGINE COOLING
On certain vehicles, corrosion may occur in the inner steel portions of the active body controls (abc) high pressure distribution hose due to extensive exposure to humidity causing deterioration of the hose.
- This may result in abc hydraulic fluid leakage near the catalytic converter. Leaking fluid may come in contact with hot engine components and lead to a possible fire.
Dealers will install new corrosion resistant abc high pressure distribution hose. The recall began on july 2, 2007. Owners may contact mercedes-benz at 1-800-367-6372.
2004 MERCEDES BENZ CL CLASS
Problem: ELECTRICAL SYSTEM
Mercedes-benz is recalling my 2006-2008 m-class, r-class, my 2005-2009 slk-class, my 2005-2008 c-class, my 2003-2004 and 2006-2008 clk-class, my 2003-2008 e-class, my 2004 and 2008 cl-class, my 2008 cls-class, my 2004 and 2007-2008 s-class, my 2003 g-class, and my 2003-2004, 2006 and 2009 sl-class vehicles. A software calibration number (scn) coding received on the affected vehicles during a recent workshop visit was incorrect. Depending on the model year and model affected, the results of an incorrect scn coding can affect a number of vehicle safety and emission functions including the following types of functions: (1) the fuel gauge readings may be incorrect; (2) a stuck fuel-level sensor may not be displayed in the instrument cluster; (3) the obd system may cause the check engine light to illuminate incorrectly; and, (4) the speedometer may be out of tolerance.
- In the event of a vehicle crash, the electrical fuel pump may not receive a crash signal that is required for the fuel pump to disconnect and prevent future fuel delivery as designed.
Dealers will recode the scn free of charge. The recall began on august 30, 2008. Owners may contact mercedes-benz at 1-800-367-6372.
