1983 DODGE 600
Problem: SUSPENSION:FRONT:CONTROL ARM:LOWER ARM
Front suspension crossmember may corrode and fail at lower control arm rear pivot mounts if operated where salt is used to aid in snow removal.
- Control arm could detach from the crossmember, adverselyaffecting directional stability, which could result in an accident.
Install attachment reinforcement brackets to prevent control arm detachment as a result of corrosion weakening.
1983 DODGE 600
Problem: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Location of hydraulic brake tube to both rear wheels causes interference and chafing between the tubes and rear suspension trailing arm pivot brackets.
Dealer will inspect rear wheel brake tubes and reroute to ensure proper tube to pivot bracket clearance. Any damaged tubes will also be replaced.
1983 DODGE 600
Problem: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
Hydraulic brake tubing routed to the left rear wheel brake system may have been bent out of shape during assembly and could chafe against the exhaust system hanger bolt.
Dealer will inspect and relocate tube, if necessary. A retaining clip will be installed to ensure adequate clearance for the tubing; any damaged tubes will also be replaced.
1983 DODGE 600
Problem: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP
The involved vehicles may be equipped with an electrical fuel filler door release which is activated through a coiled current carrying wire (a solenoid). A short in the solenoid could cause sparking at the attaching screws of the solenoid.
A solenoid ground wire will be installed, by the dealer, to prevent sparking of solenoid.
1983 DODGE 600
Problem: EQUIPMENT:ELECTRICAL
The travel computer system wiring, on the involved vehicles, may be improperly connected. This condition can cause damage to internal components.
The wiring will be reconnected to ensure proper functioning of ignition system..
